PS Mark and ISO 9001: What the DTI Factory Audit Assesses
- October 20, 2026
- Posted by: Sterling International Consulting
- Categories: ISO 9001, ISO certification In Philippines
Short answer: for products under mandatory PS certification, the DTI Bureau of Philippine Standards (BPS) audits your factory as part of licensing, and that audit includes an assessment of your quality management system against PNS ISO 9001. It is a factory-level assessment, not the same thing as holding a separate ISO 9001 certificate, but the two overlap so heavily that a working ISO 9001 system is the most practical way to be ready for it.
What the PS Mark is and why factories are audited
The Philippine Standard (PS) Quality Certification Mark is the DTI-BPS licence mark for products whose sale is controlled under a mandatory product certification scheme. If your product is covered, you cannot simply test one sample and sell. You apply for a PS licence, and the licence depends on two things: the product meets the applicable Philippine National Standard, and the factory that makes it has a quality system capable of producing conforming product batch after batch.
That second point is where ISO 9001 enters the picture. A single lab report proves one sample passed. A quality management system is what gives the regulator confidence that the next ten thousand units will pass as well.
A worked example: DAO 20-05, series of 2020 (plywood)
The clearest published example we reviewed is DTI Department Administrative Order No. 20-05, series of 2020, issued on 8 October 2020 for the mandatory product certification of plywood. For local and foreign manufacturers it requires, in plain terms:
- a quality management system manual as part of the licence application;
- a factory audit that includes an assessment of the quality management system’s conformity to PNS ISO 9001; and
- annual system and product audits after the licence is granted.
Two features of this wording matter. First, the audit assesses conformity of your QMS to PNS ISO 9001. It does not say you must hold an ISO 9001 certificate issued by a certification body. Second, the audit does not stop at the first licence: it recurs every year, so the system has to keep working, not just look good on audit day.
Other product DAOs vary. Plywood is one example. Always read the technical regulation for your own product before you plan.
Why your product’s order may read differently
Each mandatory product certification scheme has its own administrative order. The plywood order is the one we have read in detail. Reports indicate that other schemes, for example the one for ceramic tiles under DAO 09-2020, follow the same model of a PNS ISO 9001-based factory QMS assessment, but this has to be confirmed product by product. Details such as which edition of the standard is referenced, how often audits happen, whether foreign manufacturers are treated differently and what testing is required can all differ. Check the current order for your product on the DTI website, or ask BPS directly, before you commit a budget or a timeline.
Factory audit versus ISO 9001 certificate
Manufacturers often ask whether they need an ISO 9001 certificate to get a PS licence. Based on the plywood order, the requirement is for the BPS audit to find your QMS conforming to PNS ISO 9001. A certificate from an accredited certification body is a different document, issued after a different audit, for a different purpose.
| Point | BPS factory audit for the PS licence | ISO 9001 certification |
|---|---|---|
| Who audits | DTI-BPS | An accredited certification body |
| Purpose | Condition of the PS licence for a specific product | Independent proof that your whole QMS conforms to ISO 9001 |
| Scope | The factory and the product under the PS scheme | The scope you define and the certification body accepts |
| Follow-up | Annual system and product audits (per the plywood order) | Annual surveillance and recertification on a cycle |
| Accepted by | The regulator, for that product | Customers, tender committees and other regulators |
The practical conclusion: the same documented system can serve both. If you build to ISO 9001 properly, you are ready for the BPS assessment, and you also hold a certificate that retail buyers, contractors and government procurement teams recognise. If you build only for the BPS audit, you may pass the licence but have nothing portable to show a customer. See our guide to what drives ISO certification cost in the Philippines before you decide the scope.
What auditors look for in a factory QMS
Whatever the product, a factory assessment against ISO 9001 comes down to evidence that production is controlled. Expect the auditor to follow a batch from receiving to dispatch and to ask for the records at each step:
- Raw material control: approved suppliers, incoming inspection and records that tie materials to batches.
- Process control: work instructions, process parameters, who is authorised to run each step.
- Inspection and testing: in-house tests against the product standard, with calibrated equipment and recorded results.
- Calibration: a register of measuring equipment, calibration dates and traceability.
- Nonconforming product: how failures are identified, segregated, investigated and prevented from recurring.
- Traceability: the ability to trace a finished unit back to its materials, line and date.
- Complaints: a route from customer feedback to corrective action.
- Internal audit and management review: evidence that management looks at the system’s performance and acts.
A practical readiness path
- Confirm your scheme. Identify the DAO or technical regulation that governs your product and read its licensing and factory-audit provisions.
- Run a gap assessment. Compare your current practice with ISO 9001 and with the audit provisions of your order. Most factories find the gaps are in records, calibration and nonconformity handling, not in the production itself.
- Build the system with your team. Write the QMS manual and procedures around how you really make the product, so the people on the line can follow them.
- Run it for long enough to show records. An audit needs evidence of operation, so allow time for batches, internal audits and a management review to be recorded.
- Prepare for the annual cycle. Schedule internal audits and product testing so that the yearly BPS audits are routine.
- Decide on ISO 9001 certification. If customers or tenders want an independent certificate, add it from the same system through an accredited certification body.
What to prepare before you apply
Application files go more smoothly when the basics are ready before the first form is filed. Gather your business registration and plant location details, the product standard and the exact product models you intend to cover, a process flow from receiving to dispatch, your list of key materials and suppliers, the test equipment you own and its calibration status, and the name of the person who will act as management representative for quality. If tests are done by an outside laboratory, keep its accreditation details and reports on file as well.
It also helps to decide early who in your organisation answers the auditor. Production supervisors, the quality head and the warehouse lead should each be able to explain their own part of the system in their own words. Auditors learn more from a five-minute conversation on the line than from the manual, and a team that has been trained on the system answers with confidence.
ISO 9001:2026 and your timing
ISO 9001 is changing to its 2026 edition, and certificates issued under the 2015 edition remain valid for a transition period. If you are building a system now, there is little reason to design it to the older edition. Check which edition your product order and your customers refer to, and follow our ISO 9001:2026 transition guidance if you already hold a 2015 certificate.
Common mistakes manufacturers make
- Treating the factory audit as a paperwork exercise and writing a manual that nobody on the line has seen.
- Leaving calibration and traceability until the last month.
- Assuming the plywood rules apply to a different product without reading that product’s own order.
- Buying a “ready-made” manual set with another company’s name inside it. An auditor will find it within an hour.
- Ignoring the annual audits that follow the licence.
How Sterling helps
Sterling International Consulting prepares manufacturers for factory audits and ISO 9001 certification. Our team draws on 20+ years of work behind 8,100+ client engagements spanning 60+ countries, and the specialists involved have worked in management systems for 30+ years. A five-user Effivity subscription for documents, records and corrective actions comes with every engagement, together with complimentary awareness e-learning on Sterling Academy for your staff. We prepare you and your system; the licensing audit is carried out by DTI-BPS and any ISO 9001 certificate is issued by an accredited certification body. For help choosing a partner, read how to choose an ISO certification consultant in the Philippines.
Frequently asked questions
Do I need an ISO 9001 certificate to get a PS licence?
In the plywood order we reviewed (DAO 20-05, series of 2020), the factory audit assesses your QMS for conformity to PNS ISO 9001. The order does not describe a separate certification body certificate as the requirement. Read the order for your own product to be sure.
Who carries out the factory audit?
DTI-BPS assesses the factory as part of PS licensing. Certification bodies audit for ISO 9001 certificates, which is a separate process.
Are the annual audits mandatory?
The plywood order provides for annual system and product audits. Other products may differ, so check the order that applies to you.
Can one system satisfy both the PS licence and ISO 9001?
Yes. A QMS built to ISO 9001 and run with proper records is the natural basis for both, provided you also meet the product-specific testing and marking rules of your order.
Does the same rule apply to ceramic tiles or other products?
Reports suggest other schemes follow a similar model, but each product has its own administrative order. Confirm the current text for your product before relying on this article.
Is this legal advice?
No. It is a plain-language summary of a published order and general ISO 9001 practice. Check the current instrument and speak to BPS for your product.
Next step
Reviewed by Mark Santos, Sterling International Consulting · October 2026
